Diamond Style Vibro-Insulator® Plate Mounts
Diamond Plate Mounts are designed to protect equipment from vibration and noise at low distributing frequencies. Produced with Natural rubber these mounts isolate in the horizontal and vertical planes. When used with snubbing washers these mounts offer interlocking metal protection. Plate Mounts are also know as Plateform Mounts.
Features and Benefits:
- easy to install with minimum maintenance
- Available in 4 Durometers 40, 50, 60, & 70 Shore A
- Axial loads from 4 to 12 pounds
- low profile with interlocking metal protection
- Made in the USA
Environmental:
- All load ratings are based on using Natural Rubber.
- Temperature range -40º F to 155º F.
- Natural Rubber is not recommended for exposure to the weather, or petroleum products.
Delivery is 6 weeks.
1.52 |
2.32 |
1.945 |
.25 |
.165 |
.050 |
.55 |
.97 |
22 |
.18 |
4 |
40 |
Natural Rubber |
|||
1.52 |
2.32 |
1.945 |
.25 |
.165 |
.050 |
.55 |
.97 |
30 |
.18 |
6 |
50 |
Natural Rubber |
|||
1.52 |
2.32 |
1.945 |
.25 |
.165 |
.050 |
.55 |
.97 |
45 |
.18 |
8 |
60 |
Natural Rubber |
|||
1.52 |
2.32 |
1.945 |
.25 |
.165 |
.050 |
.55 |
.97 |
70 |
.18 |
12 |
70 |
Natural Rubber |
|||
| Diameter - in (A) | Length - in (B) | Mounting Holes on Center - in (C) | Diameter - in (D) | Mounting Hole Diameter - in (E) | Flange Thickness - in (F) | Height - in (G) | Height - in (H) | Axial Spring Rate - lb/in | Axial Maximum Recommended Deflection - in | Axial Load at Maximum Deflection - lb | Durometer | Elastomer | Dimensional CAD Drawing (pdf) |
Use the sort keys located at the bottom of the table to find the exact Vibro-Insulator© you require. Please contact us for selection help.