K1100 Series Flex Mounts (large)

K1100 Series Vibro-Insulator® Flex Mounts (Large)

 Features and Benefits:

• Low Cost
• Easy to install and no maintenance
• Low profile design excellent for incorporating into difficult applications
• Flexible ribbed fingues for maximum damping
• Excellent noise reducion
• Mounts can be stacked for increased deflection
• Each Flex Mount set consists of a elastomeric bushing (A) and rebound ring (B)
• Availble in 7 sizes with compression loads ranging from 57 to 300 pounds
• Available in 3 elastomers: Natural Rubber, Neoprene, and Nitrile (Buna-N)
• Available in 30, 40, 50, 60, and 70 Durometer Shore A
• Made in the USA

Applications:

 HVAC equipment, panels, sensitive electronic equipment, office machines, pumps, compressors, motors, platens, medical equipment, office and data processing equipment, blowers, fans, Welders

Environmental Data:

• All static load test data for the K1100 Series Flex Vibro-Insulator® Mounts is based on Natural Rubber.
• Operating temperatures for Natural Rubber should not exceed 155° F.
• Natural Rubber is not recommended from exposure to oil, gasoline, ozone sunlight.  
•  10:1 Transmissibility at resonance.

Natural Rubber (NR)

Advantages:  Outstanding resilience; high tensile strength; superior resistance to tear and abasion; excellent rebound elasticity (snap); good flexibility at low temperatures (-40° F to 155° F).

Limitations: 

Poor resistance to heat, ozone, and sunlight; very little resistance to oil gasoline, and hydrocarbon solvents; Operating temperatures should not exceed 155° F.

• Natural Rubber is not recommended from exposure to oil, gasoline, ozone sunlight.

Neoprene (CR)

Advantages:  Good inherent flame resistance; moderate resistance to oil and gasoline; very good resistance to weather, ozone, and natural aging; good resistance to flex cracking; very good resistance to alkalis and acids.

Limitations:  Poor to fair resistance aromatic and oxygenated solvents; limited flexibility at low temperatures (10° F to 180° F).

Nitrile (Buna-N)

Advantages:  Very good resistance to oil and gasoline; superior resistance to petroleum-based hydraulic fluids; wide range of service temperatures (-65° F to 300° F); good resistance to hydrocarbon solvents; very good resistance to alkalis and acids.

Limitations:  Inferior resistance to ozone, sunlight, and natural aging; poor resistance to oxygenated solvents.

Source: American Chemical Society

Delivery is 6 weeks.