| Top Diameter (A) | 4.50 in |
| Bottom Diameter (B) | 3.25 in |
| Height (C) | 4.00 in |
| Height (D) | 1.50 in |
| Flange Thickness (E) | .250 in |
| Washer Thickness (F) | .250 in |
| Mounting Holes on Center (G) | 6.00 in |
| Length (H) | 7.50 in |
| Width (I) | 4.75 in |
| Mounting Holes (J) | .656 in |
| Through Hole (K) | 1.06 in |
| Recommended Clearance (L) | 3.75 in |
| Axial Spring Rate | 11000 lb/in |
| Axial Maximum Recommended Deflection | 0.15 in |
| Axial Load at Maximum Deflection | 1600 lb |
| Radial Spring Rate | 12100 lb/in |
| Radial Maximum Recommended Deflection | .09 in |
| Radial Load at Maximum Deflection | 1000 lb |
| Snubbing Washer | 3.25 X 1.01 X .250 in |
| Durometer | 50 |
| Elastomer | Neoprene |
| Dimensional CAD Drawing (pdf) | |
| Additional Product Information |
K7090 Deflection Graphs4.jpg |
Back to more All-Direction Flange Mounts