Single Male

Single Male Vibro-Isolator® Bumpers and Feet

 Single Male Conical Bumpers and Feet have a machined taped insert that is both chemically and mechanically bonded. These bumpers are highly durable at extreme temperatures. They can be used in thousands of applications.

Features and Benefits:

• Low cost
• Easy to install and no maintenance required
• Compression loads from 40 to 180 pounds
• Compounds formulated for optimal chemical and mechanical elastomer-to-metal bonds
• Available in Natural Rubber, Neoprene, and Nitrile (Buna-N)
• Available in 30, 40, 50, 60, and 70 Durometer Shore A
• Available with male/male, male/female, and single male hardware
• Available in both English and Metric hardware
• All inserts plated with yellow zinc dichromate
• Metal inserts are hardened to Grade 5 Specifications
• 2-D PDF prints are available for each mount
• 2-D DWG, 3-D IGES, and 3-D SolidWorks are available upon request
• Made in the USA

Environmental Data:

• All static load test data for the Conical Vibro-Insulator® Mounts is based on Natural Rubber.
• Operating temperatures for Natural Rubber should not exceed 155° F.
• Natural Rubber is not recommended from exposure to oil, gasolene, ozone sunlight.  
• Conical mounts are not recommended for use in the tension mode

Natural Rubber (NR)

Advantages:  Outstanding resilience; high tensile strength; superior resistance to tear and abasion; excellent rebound elasticity (snap); good flexibility at low temperatures (-40° to 155° F).

Limitations: 

Poor resistance to heat, ozone, and sunlight; very little resistance to oil gasoline, and hydrocarbon solvents; Operating temperatures should not exceed 155° F.

• Natural Rubber is not recommended from exposure to oil, gasoline, ozone sunlight.
• Conical style mounts are not recomened in tension applications.

Neoprene (CR)

Advantages:  Good inherent flame resistance; moderate resistance to oil and gasoline; very good resistance to weather, ozone, and natural aging; good resistance to flex cracking; very good resistance to alkalis and acids.

Limitations:  Poor to fair resistance aromatic and oxygenated solvents; limited flexibility at low temperatures (10° to 180° F).

Nitrile (Buna-N)

Advantages:  Very good resistance to oil and gasoline; superior resistance to petroleum-based hydraulic fluids; wide range of service temperatures (-65 to 300° F); good resistance to hydrocarbon solvents; very good resistance to alkalis and acids.

Limitations:  Inferior resistance to ozone, sunlight, and natural aging; poor resistance to oxygenated solvents.

Source: American Chemical Society

Delivery is 8 weeks.