| Diameter (A) | .92 in |
| Diameter (B) | .344 in |
| Diameter (C) | .688 in |
| Insert Thickness (D) | .402 in |
| Flange Thickness (E) | .134 in |
| Part Length (F) | .50 in |
| Snub Washer Diameter (G) | 1.08 in |
| Snub Washer Diameter (H) | .95 in |
| Radius Required (R) | .06 in |
| Recommended Socket Diameter (S) | .65 in |
| Support Structure Thickness (T) | .25 - .25 in |
| Axial Spring Rate | 2230 lb/in |
| Axial Maximum Recommended Deflection | .013 in |
| Axial Load at Maximum Deflection | 29 lb |
| Shore A Durometer | 70 |
| Elastomer | Nitrile |
| Dimensional CAD Drawing (pdf) | |
| Additional Product Information |
K20-12 Deflection Chart11.jpg K20 ABC CAD47.PDF |
Back to more One-Piece Center Bonded Mounts