| Top Diameter (A) | 3.53 in |
| Bottom Diameter (B) | 2.50 in |
| Height (C) | 3.00 in |
| Height (D) | 1.37 in |
| Flange Thickness (E) | .188 in |
| Washer Thickness (F) | .187 in |
| Mounting Holes on Center (G) | 5.00 in |
| Length (H) | 6.25 in |
| Width (I) | 3.75 in |
| Mounting Holes (J) | .531 in |
| Through Hole (K) | 0.794 in |
| Recommended Clearance (L) | 2.885 in |
| Axial Spring Rate | 9000 lb/in |
| Axial Maximum Recommended Deflection | 0.14 in |
| Axial Load at Maximum Deflection | 1260 lb |
| Radial Spring Rate | 10200 lb/in |
| Radial Maximum Recommended Deflection | .09 in |
| Radial Load at Maximum Deflection | 920 lb |
| Snubbing Washer | 2.50 X .760 X .188 in |
| Durometer | 60 |
| Elastomer | Nitrile |
| Dimensional CAD Drawing (pdf) | |
| Additional Product Information |
K7070 Deflection Graphs8.jpg |
Back to more All-Direction Flange Mounts